1 科技成果獎勵情況 [1]中國近海高水垂比大位移鉆井關鍵技術研究及應用,國家科技進步二等獎,2007 [2]新型高抗擠套管與復合管柱技術,國家科技進步二等獎,2005 [3]定向井、叢式井技術研究,中國石油天然氣總公司(部級)科技進步特等獎,1990 [4]中國近海高水垂比大位移鉆井關鍵技術研究及應用,中國海洋石油總公司科技進步壹等獎,2006 [5]新型高抗擠套管(TP130TT)與復合管柱技術,天津市科學技術進步壹等獎,2002 [6]實鉆地層正交各向異性的評估方法,北京市科學技術進步壹等獎,1998 [7]井口脈沖振動固井新技術研究與應用,中國石油和化學工業聯合會技術發明壹等獎,2012 [8]實鉆地層鉆井特性的評估方法及其應用,中國高校科技進步二等獎,2000 [9]淺層稠油熱采井套管設計、完井工具的研制及應用,新疆維吾爾自治區科技進步二等獎,2005 [10]高溫高壓氣井油套管柱密封性及安全性研究,陜西省科技進步二等獎,2004 [11]南海西江邊際油田大位移井開發技術,深圳市科技進步壹等獎,2002;2003年度廣東省科技進步二等獎 [12]大港低滲塊狀砂巖油藏水平井鉆井技術,中國石油天然氣集團公司科技進步二等獎,1999 [13]復雜工況下鉆柱安全性關鍵因素研究,國家安全生產科技成果二等獎,2009 [14]授權發明專利16件 [15]登記軟件著作權12項
2 第壹作者發表的部分論著 [1]Modeling & Simulation in Drilling and Completion for Oil & Gas.Tech Science Press,Duluth,USA,2012 [2]復雜結構井優化設計與鉆完井控制技術.中國石油大學出版社,2011 [3]油氣井管柱力學與工程.中國石油大學出版社,2006 [4]井眼軌跡控制.石油大學出版社,1994 [5]復雜地質條件下深井超深井鉆井技術.石油工業出版社,2004 [6]油氣鉆探新技術.石油工業出版社,1998 [7]Displacement and Hydraulic Calculation of the SMD System in Ultra-deepwater Condition.Petroleum Science and Technology, 2013 [8]The Post-Buckling Behavior of A Tubular String in An Inclined Wellbore.Computer Modeling in Engineering & Sciences, 2013 [9]Research into Magnetic Guidance Technology for Directional Drilling in SAGD Horizontal Wells.Petroleum Science, 2013 [10]無隔水管深水鉆井作業管柱的力學分析.科技導報,2012 [11]On Improving the Accuracy of Prediction of the Down-hole Drag & Torque in Extended Reach Drilling (ERD). Computer Modeling in Engineering & Sciences, 2012 [12]New Method for Predicting Casing Wear in Horizontal Drilling .Petroleum Science and Technology, 2012 [13]On a Method of Prediction of the Annular Pressure Buildup in Deepwater Wells for Oil & Gas. Computer Modeling in Engineering & Sciences, 2012 [14]Numerical Simulation of Sensitivity to Loads and Strength of Casing under Complicated Conditions.Petroleum Science and Technology, 2012 [15]On Appropriately Matching the Bottomhole Pendulum Assembly with the Anisotropic Drill Bit, to Control the Hole-Deviation.Computer Modeling in Engineering & Sciences, 2012 [16]Experimental study on mechanical properties degradation of TP110TS tube steel in high H2S corrosive environment.Computers, Materials & Continua, 2011 [17]Study of a Mechanism for Well Deviation in Air Drilling and Its Control. Petroleum Science and Technology, 2011 [18]Evaluation Method for Anisotropic Drilling Characteristics of the Formation by Using Acoustic Wave Information.Acoustic Waves,InTech,2011,ISBN 978-953-307-572-3 [19]海洋石油大位移鉆井關鍵技術研究. 世界石油工業,2010 [20]Prediction of Casing Wear in Extended-Reach Drilling. Petroleum Science, 2010 [21]Limit analysis of extended reach drilling in South China Sea. Petroleum Science, 2009 [22]地層自然造斜特性的測井評價方法研究. 石油學報,2008 [23]Study and experiment on the vibration characters of BHA. SPE114634,2008 [24]煤層氣多分支井身結構設計模型研究. 石油學報,2007 [25]南海流花超大位移井摩阻/扭矩及導向鉆井分析.石油鉆采工藝,2006 [26]Experimental study of rock drill-ability anisotropy by acoustic velocity. Petroleum Science, 2006 [27]易斜地層防斜打快鉆井理論與技術探討. 石油鉆探技術,2005 [28]南海西江大位移井鉆完井工藝分析研究.石油鉆采工藝,2004 [29]南海西江大位移井定向控制技術研究.石油鉆采工藝,2004 [30]南海西江大位移井鉆頭選型技術研究.石油鉆采工藝,2004 [31]鉆井科技發展的歷史回顧回顧、現狀分析與建議.石油科技論壇,2004 [32]A Method for Calculating Tubing Behavior in HPHT Wells,Journal of Petroleum Science & Engineering,2004 [33]油氣鉆井技術展望.石油大學學報(自然科學版),2003 [34]含鹽膏層井復合管柱優化設計技術.石油鉆探技術,2003 [35]Buckling Behavior of Pipes in Oil & Gas Wells. Progress in Natural Science, 2002 [36]Inversion Method of the Formation Anisotropy.IMMM2001,Japan,27-31 May 2001 [37]水平井管柱屈曲與摩阻分析.石油大學學報(自然科學版), 2000 [38]On Instability of Wellbore & Its Trajectory.ISSST 2000 [39]套管載荷分析與強度設計軟件研究.石油鉆采工藝, 1999 [40]油氣鉆井中井眼系統的不穩定性與控制問題//高德利等:中國科協第46次“青年科學家論壇”報告文集.北京:中國科學技術出版社,1999 [41]地下資源勘探開發與鉆井問題//中國科學技術協會:中國科協第三屆青年學術年會論文集.北京:中國科學技術出版社,1998 [42]An analysis of helical buckling of long tubulars in horizontal wells.SPE50931,1998 [43]談談定向井井壁穩定性問題. 石油鉆采工藝,1997 [44]油氣勘探開發中的若幹工程問題//高德利等:中國科協第21次“青年科學家論壇”文集.北京:石油工業出版社, 1997 [45]鉆柱渦動特性分析.石油鉆采工藝,1996 [46]井眼軌跡控制問題的力學分析方法.石油學報,1996 [47]鉆壓防斜技術的實踐與理論探討.石油鉆采工藝,1995 [48]Predicting and Scanning of Wellbore Trajectory in Horizontal Well Using Advanced Models.SPE 29982, 1995 [49]石油鉆井底部鉆具組合大撓度三維分析.應用力學學報,1995 [50]鉆頭和地層各向異性鉆井特性的壹種表達方法.石油學報,1994 [51]鄰井距離掃描計算與繪圖原理.石油鉆采工藝,1994 [52]談談石油鉆柱失效問題.石油鉆采工藝,1994 [53]典型導向鉆具組合的力學分析方法.石油大學學報(自然科學),1993 [54]地層各向異性的評估方法.石油學報,1993 [55]下部鉆具組合大撓度問題的權余法分析.石油學報, 1992 [56]石油鉆井底部鉆具組合平面縱橫彎曲大撓度分析.工程力學,1992 [57]鉆頭各向異性鉆井特性的理論分析與實驗.石油大學報(自然科學版),1991 [58]帶彎接頭井下動力鉆具組合的造斜特性.石油鉆探技術,1991 [59]正交各向異性地層對井斜的影響.石油學報,1990 [60]典型地層的各向異性鉆井特性.石油大學學報(自然科學版),1990 [61]A mechanical analysis of BHA behavior in a horizontal well with the Method of Wghted Residuals.Second China-Canada Heavy Oil Symposium,1990 [62]鉆頭與地層相互作用的三維宏觀分析.石油大學學報(自然科學版),1989 [63]鉆頭與地層相互作用的新模型.石油鉆采工藝, 1989 [64]井眼軌跡控制的多功能微機程序.石油鉆采工藝,1989 [65]彈性鉆柱兩個特殊點的意義及計算方法.華東石油學院學報(自然科學版),1987 [66]受內壓異厚度截錐~圓柱組合薄殼的塑性極限分析.機械強度,1986